Vlekkenzoekmachine
Removing ointment stains
Op deze pagina:
Eigenaar at James B.V.
Door het delen van deze blogs en informatie wil Martijn voorop blijven lopen met kennis over binnenmilieu, hygiëne, onderhoud en vlekverwijdering van tapijt, vloerkleed en meubels. Een bedrijf evenals de consument kan bij James terecht met vragen op het gebied van onderhoud en het verwijderen van vlekken uit tapijten, vloeren, vloerkleden of meubels.
Latest posts by Martijn Peters (see all)
Removing ointment stains
An ointment stain is easily made: a little skin ointment, skin cream or medicinal ointment can end up on your sofa, carpet or floor without you noticing. Because ointment often contains fat or oil, it absorbs quickly and leaves a noticeable dark spot. These stains can be particularly stubborn on textiles and porous surfaces.
If you wait too long to remove an ointment stain, the grease will have more time to penetrate deep into the material. That makes it more difficult to remove the stain completely. Fortunately, an ointment stain does not have to be a permanent problem. Whether you have carpet, hard floors or upholstery fabric, with the right method you can usually get the surface completely clean again. Below you will discover the best approach for each surface.
Voor deze vlekken geldt hetzelfde advies: Ointment, Balm
Characteristics (anatomy) of an ointment stain
An ointment stain usually contains fats, oils or waxy substances that penetrate deep into fibres or pores. These ingredients make the stain sticky and ensure that dirt adheres easily. On textiles, the stain may spread and be difficult to remove without enlarging the stain. Hard floors can become dull or develop a greasy sheen. Incorrect cleaning – for example, rubbing hard or using hot water – can actually set the stain or spread it. If you do not treat an ointment stain quickly, it often leaves a stubborn dark mark.
Removing ointment stains from carpet or rugs
Ointment absorbs quickly into the carpet, especially if it has a deep pile or dense weave. The greasy components adhere to the fibres and leave a noticeable dark spot. Because ointment is absorbed slowly, the stain initially appears small, but over time it becomes larger and more difficult to treat.
If you don’t tackle the stain immediately, the grease will spread further into the underlayer. This not only makes the carpet dirty, but can also cause permanent dark discolouration. In addition, an ointment stain attracts dirt, which exacerbates the problem over time.
It is important to remove excess ointment as quickly as possible and then treat the stain carefully. Ensure that you only clean the affected part of the carpet and avoid getting it too wet. Use a suitable cleaner such as James Stainspray and then dry the surface thoroughly so that no residue or moisture remains.
Treat with James Stainspray on a cotton cloth
You can treat this stain with James Stainspray on a cotton cloth. For this you need James Stainspray and a white cotton cloth. Next:
- Test for colour and material resistance in an inconspicuous area: apply, let it dry completely and evaluate.
- Spray James Stainspray on a dry, white cotton cloth.
- Use this cloth to wipe the stain using wide sweeping strokes, without spreading the stain. Repeat frequently with a clean part of the cloth.
- Directly spray James Stainspray onto any residue and repeat the process using wide sweeping strokes.
Treat with James Stainspray on a cotton cloth
You can treat this stain with James Stainspray on a cotton cloth. For this you need James Stainspray and a white cotton cloth. Next:
- Test for colour and material resistance in an inconspicuous area: apply, let it dry completely and evaluate.
- Spray James Stainspray on a dry, white cotton cloth.
- Use this cloth to wipe the stain using wide sweeping strokes, without spreading the stain. Repeat frequently with a clean part of the cloth.
- Directly spray James Stainspray onto any residue and repeat the process using wide sweeping strokes.
Removing ointment stains from hard floors
On hard floors such as PVC, vinyl, laminate, LVT and natural stone, an ointment stain often immediately forms a visible, greasy layer. The oily components of ointment quickly adhere to the top layer and can spread easily, especially in seams or reliefs. This creates a shiny or dull spot that affects the appearance of your floor.
If an ointment stain is left for too long, not only will your floor look less attractive, but cleaning will also become more difficult due to grease residues that attract dirt. Residual grease can trap dirt and dust, making cleaning increasingly difficult. In addition, grease can penetrate deep into natural stone, resulting in permanent discolouration. With flooring such as PVC, vinyl and laminate, you run the risk of permanent differences in gloss and structure.
To prevent these kinds of problems, it is important to respond as quickly as possible. By acting immediately, you ensure that the ointment does not have a chance to set or penetrate deep into your floor. This not only prevents permanent damage, but also preserves the beautiful, original appearance of your floor. This will keep your floor looking good for longer and effectively protect it from the negative effects of ointment stains.
Treatment with James Remover
This stain can be treated with James Remover. Before use, always test the surface in an inconspicuous place for colour and material resistance: apply, leave to set for 5 minutes, wipe the tested area with water, allow to dry and assess.
- Spray directly onto the purpose area
- Leave to soak for about 1 to 5 minutes
- Then, use a white cotton cloth to remove the grease
- Persistent stains may be treated carefully with a soft brush or plastic spatula. After use, always clean the area with water!
- After use, always clean the area with water.
Attention: be careful when working near a glue seams. Allow James Remover to soak in shortly. Do not let the product penetrate into cracks or seams.
Treatment with James Remover
This stain can be treated with James Remover. Before use, always test the surface in an inconspicuous place for colour and material resistance: apply, leave to set for 5 minutes, wipe the tested area with water, allow to dry and assess.
- Spray directly onto the purpose area
- Leave to soak for about 1 to 5 minutes
- Then, use a white cotton cloth to remove the grease
- Persistent stains may be treated carefully with a soft brush or plastic spatula. After use, always clean the area with water!
- After use, always clean the area with water.
Attention: be careful when working near a glue seams. Allow James Remover to soak in shortly. Do not let the product penetrate into cracks or seams.
Removing ointment stains from upholstery
An ointment stain on a sofa or chair is often immediately noticeable, especially on upholstery with an open or coarse structure. The oily substance quickly soaks into the fibres and leaves a dark or shiny spot on the upholstery. Because ointment usually remains unnoticed, the stain has often already penetrated deeply by the time you discover it.
The longer an ointment stain remains, the further the grease spreads into deeper layers of the fabric. It is drawn through the fibres towards the filling, which can cause greater discolouration and persistent odour problems. Dirt also easily sticks to the remaining residue, making the spot increasingly visible and difficult to remove.
By acting quickly, you can prevent the stain from settling deeper into the sofa or leaving permanent marks. Especially with fabric furniture, it is important to take immediate action to prevent discolouration and unpleasant odours. This will keep your furniture looking beautiful and fresh, without you having to worry about permanent damage.
Treat with James Stainspray on a cotton cloth
You can treat this stain with James Stainspray on a cotton cloth. For this you need James Stainspray and a white cotton cloth. Next:
- Test for colour and material resistance in an inconspicuous area: apply, let it dry completely and evaluate.
- Spray James Stainspray on a dry, white cotton cloth.
- Use this cloth to wipe the stain using wide sweeping strokes, without spreading the stain. Repeat frequently with a clean part of the cloth.
- Directly spray James Stainspray onto any residue and repeat the process using wide sweeping strokes.
Treat with James Stainspray on a cotton cloth
You can treat this stain with James Stainspray on a cotton cloth. For this you need James Stainspray and a white cotton cloth. Next:
- Test for colour and material resistance in an inconspicuous area: apply, let it dry completely and evaluate.
- Spray James Stainspray on a dry, white cotton cloth.
- Use this cloth to wipe the stain using wide sweeping strokes, without spreading the stain. Repeat frequently with a clean part of the cloth.
- Directly spray James Stainspray onto any residue and repeat the process using wide sweeping strokes.
Why rely on home remedies that can do more harm than good? Opt for a professional approach with James’ reliable products. Our products have been extensively tested and offer the assurance of a clean and stain-free solution for almost any situation.
Frequently asked questions and myths
There are all sorts of stories going around about how you should remove stains with this ointment. From granny’s remedies to persistent tips from the internet – but what really works? In this section, we answer frequently asked questions and debunk a few myths. This allows you to get started with confidence.
Why are ointment stains so stubborn in fabrics and carpets?
Ointment is a combination of fats, oils, waxes and sometimes medicinal ingredients. These quickly soak into textiles and attach themselves to fibres. Because ointment often melts slowly at body temperature, it spreads easily when it comes into contact with furniture or floors. The oily components leave behind a stubborn film that is difficult to remove with standard cleaning.
Can I remove ointment stains with warm water and washing-up liquid?
Detergent helps to remove grease to some extent, but often leaves a sticky residue on textiles or porous floors. Furthermore, it does not dissolve the oily wax or cream layer of ointment well. Hot water can temporarily make the stain more liquid, but it also spreads it. A deep-acting, grease-dissolving and residue-free approach works better and is safer.
Does washing-up liquid help remove an ointment stain?
Dishwashing liquid can dissolve grease, but it is not always safe for textiles or sensitive surfaces. In addition, the ointment often leaves a sticky film if you do not wipe it off properly and dry the area. A professional cleaning agent that is suitable for your surface is therefore safer and more effective.
Why does a greasy shine remain visible after cleaning?
The fats and waxes in ointment leave a thin layer that adheres to fibres or floors. If it is not completely broken down, a shine or haze will remain visible under light. This is particularly noticeable on dark fabrics or matt floors. A second treatment is often necessary to completely remove these residues.
Can ointment affect the colour of my floor or upholstery?
Some ointments contain active ingredients or perfumes that react with materials. This can lead to discolouration, differences in gloss or even damage to finishes on, for example, wood, plastic or textiles. Prolonged contact or incorrect cleaning may intensify the effect. Acting quickly and thoughtfully prevents permanent damage.
Deal with any stain using the right approach from James
Ointment stains can be stubborn, but with the right approach, they can be removed effectively. Whether it’s a grease stain on your sofa, floor or carpet, James’ products and advice offer you a safe and effective solution. This is how you keep your interior clean and in top condition. Get started right away and don’t let that stain become a permanent problem.